The first step to good gun cleaning is to scrub out the bore of your gun using the correct Phosphor bronze brush size, and use a bore solvent like Bor-Solv Supreme for the greatest possible results. This will remove all powder fouling and residue from the bore of your gun if you use it vigorously. Occasionally you may want to use a bristle brush so that the bore can retain more solvent for a longer period of time, making it an improvement. This method is more commonly used in Europe than in North America.
After scrubbing out the gun using a Herringbone 4″ x 2″ patch in a split brass or a nylon jag, removing any of the contaminated solvent. The split jag is used by inserting a patch midway, rotating it in your hand in whatever direction you are going to tighten, twisting the rod in use. You always want to make sure to check the chamber when cleaning. Is there powder residue around the forcing cone? If so, then it may be advantageous to use a chamber brush handle with a chamber brush in order to remove the build up of this residue.
Next you should oil the gun boars using a clean wool mop and some Rangoon oil. Rangoon oil is a tenacious oil that evaporates slowly and therefore allows the gun bore to be stored away for a longer period of time without requiring as much maintenance. Occasionally you should make a point to wash the wool mop out with warm soapy water. If the mop is exceptionally dirty, it might be better to use some paraffin or turps first hand. When the mop is dry you should re soak it in clean Rangoon oil, keeping it in a polythene sleeve or a similar container to keep it fresh and in good shape.
When you store your gun, you should avoid forgetting to relieve the tension of the main springs. This can be done by inserting a suitable pair of snap caps before dry firing the gun. After you install a muzzle stuffer, it will keep the oil vapor inside of the barrel, and it will also keep dirt out and will keep the end of the barrel from getting damaged inside your gun cabinet or another similar storage device.
Before you fire the gun again it is vital that you remove any and all remaining traces of oil. Any oil that remains in the barrel could harm the barrel walls when you fire it for the first time. Use a patch and jag to remove any remaining oil, and check the chamber thoroughly before you fire to make sure that there is no powder residue around the forcing cone in the chamber before you fire the gun.
Photo Credits: 1
Originally posted 2009-01-20 05:59:56. Republished by Blog Post Promoter
Related Posts -
Guide to Hunting Guns pt 2 ... This article is a continuation from part 1. Now what you are going to want to do is to go to the dealer that you have chosen and let them know that you are interested in transferring the purchase of a firearm from a website online. The dealer is...... -
Eight Tips for Deer Hunting Success When it comes to hunting deer, it is vitally important for you to pay attention to the smallest details. Here are a few unique tips that many hunters miss when it comes to bagging their dream trophy out in the woods. 1 - Use a Painted Stand - Paint both...... -
Open Season With fall coming, it is soon to be open season for many different animals for hunting. Seasoned and new amateur hunters will be out in force and will be scouring designated areas for live game in the hopes of a good kill that they will be able to bring home...... -
More Hunting Terms Blind Planter - This is a name for the person that places the bird or the bumper at a designated spot for the purpose of a blind retrieve. Blink - This describes the situation when the dog locates the bumper or the bird during the retrieve but does not actually...... -
Hunting and Hunters Lexicon Abomasum - This is the fourth chamber within the stomach of a deer. Along with the omasum, this is considered to be the true stomach of the deer. It helps to aid in digestion through the production of acids that break down food particles making it easier for nutrients to......