Hunters and sportsmen alike that would like to save money should look into reloading their own shotgun shells. Not only can shell loading be a hobby within a hobby, it will also give the hunter or sportsman a chance to make their own custom shells to match whatever game or target they prefer to shoot.
The difficulty of this exercise is moderately challenging, and can be expensive at first, but will save you money over time, sooner if you shoot a lot. You will need empty hulls, a reloader (the most expensive piece of equipment, and also the most important), primer, powder, wad, and shot. We will now go step by step through the process of reloading your own shells.
1 – Remove any spent primer from the casing, and resize the shells brass at the bottom. Be sure to pull the handle of the reloader all the way down, else you ma produce a defective shot shell.
2 – Place your new primer in the second station with the shot shell on top of it. Pull the handle down. Be sure the primer is level and even with the brass, and is not sticking out.
3 – Put the shell into station three and pull the handle. Now move the top bar to the left of the machine with your other hand. Let the handle up, and put the wad in the guide. Pull the handle again. This will place the wad at the bottom of the shell. While the wad is still depressed, move the bar to the right.
4 – Move to station 4, and pull he handle to make the starter crimp. Before you finalize the crimp, look into the shell and be sure the shot is on top of the wad. If things do not look right, stock and cut open the shell so you can figure out what you missed.
5 – If all was okay in the previous step, place the shell into station 5, and pull the handle to complete the crimp. Congratulations, you have just made your first shotgun shell.
Warnings and Tips
A good reloader for novices to start with would be the MEC Jr. 600, which is a single stage reloader. This means each step is completed with a single lever pull. An experienced shell reloader can fill a 25 shell box in as short as 7 minutes, and 10 minutes at the most. Components of the shells, the lead or steel shot, the wads and powder, and the primer can be ordered off the internet, or at the local sporting goods retailer.
Once fired hulls can be had for as little a three cents for each hull, or if you have the time, for free off the ground at local trap and skeet shooting ranges. Be sure to follow manufacturer instructions. Alterations to a recipe can lead to shells exploding in the barrel, causing grievous injury, or even death.
Photo Credits: Three if by Bike
Originally posted 2009-10-08 03:18:24. Republished by Blog Post Promoter
Related Posts -
Guidelines for Safe Hunting Hunting, by nature, is a dangerous and risky sport because it involves firearms, and shooting those firearms. Hunting accidents occur all year long in different parts of the world, which only proves the importance of safe hunting guidelines and why you should uphold them. Deer hunting safety is a truly...... -
Practicing Safety With a Gun While Hunting Gun safety is absolutely critical when it comes to handling firearms and hunting. It is important that you learn how you can practice safety with your gun in order to prevent any injuries not only to you, but also to those that are around you as well. It is vitally...... -
Choosing your Shotgun If you are looking for a firearm that can be useful for a variety of different purposes, then the shotgun is one of the greatest options that you can consider. Aside from the fact that the shotgun is useful for recreational purposes, law enforcement, hunting, personal defense, sporting and military...... -
Open Season With fall coming, it is soon to be open season for many different animals for hunting. Seasoned and new amateur hunters will be out in force and will be scouring designated areas for live game in the hopes of a good kill that they will be able to bring home...... -
Understanding what Birdshot Is Birdshot can be described as a type of metal shot that was designed to be packed into shotgun shells. Birdshot consists of a number of metal spheres that are milled so that they are all the same size, and so that they can be easily packed together into a shotgun......